Case Studies

Client: AZFEN
Date : July 2021
Location : AZFEN
Work scope : Weighing of BP ACE DES Lower Section

Client: MHWIRTH
Date: June 2021
Location: ORCA base
Work scope: Load test of DDM Frame utilizing 180te mobile crane

Client: CMS
Date: 04/2021
Location: DSV Akademik Tofiq Ismayilov at BSY
Work Scope: Replacement of SORMEC crane wire ropes and load test

Client : Caspian Drilling Company
Scope: ORCA performed recertification of site machinery.
Project : Annual recertification of Forklifts
Site : CDC Base
Date : 12.10.21

Scope: Istiglal RIG
API RP 4G CAT 111 Derrick Inspection
Client: CDC
Date: July 2018
4 man rope access team and…

Scope: Satti Jack UP Rig Project – Derrick Reconstruct
Installation off new drilling equipment
Client: CDC
Date: July 2018

4 man rope access team and API derrick inspector carried…

Scope: Saturn Jack UP Rig – upgrade
Client: Eurasia Drilling
Date: July 2018

Loler

Critical load path inspection

Crane wire change out;

Scope: PLBH – Wire Rope NDT
Client: Saipem
Date: October 2019

Wire – 112 mm dia compact wire rope using magnetic head to detect any defects internally in the wires which is not visible and subsurface.

Scope: Load test of 300te main hoist of KONE pedestal crane on board of Gurban Abasov
Client: CMS
Date: November 2019
Location: Crane Barge Gurban Abasov

ORCA team successfully perform load test of Pedestal Crane onboard of Gurban Abasov crane vessel.

Scope: Maersk Explorer – CLPI critical load path inspection
Client: Maersk
Date: May 2020

Pipe handling equipment ndt

Elevators, slips , rotary bushings

Scope: Work Scope: Perform 5 yearly load test and examination of 2 x Pedestal Cranes.
Client: CDC
Date: August 2020
Location: Heydar Aliyev semi-submersible drilling rig
Equipment used: 2 x 50;

Scope: ORCA inspectors performing NDT inspection on multiple crane wire ropes offshore .
Vessel: SCV “ Khankendi”
Date: August 2020
Project Description: Non Destructive Inspection of Crane Wire Ropes
Equipment: steel wire rope flaw detector.

Scope: Work scope: Load test of 150te of main hoist of KONE crane
Client: CMS
Date: August 2020
Location: Gurban Abbasov crane barge

Scope: Load test of auxiliary hoist of 900te pedestal crane
Client: Saipem
Date: September 2020
Location SCV “Khankendi”
Equipment used : 50 te + 20 te water bags , 100 te tensile load cell

Scope: Project : Inspection of anchor lines during rig move
Client : CDC
Date: November 2020
Location: Istiglal drilling rig

Scope: DTI inspection
Client: Franks International
Date: November 2020
Location: Franks International work shop;

Scope: LOLER inspection
Client: CDC
Date: November 2020
Location: SATTI drilling rig

Scope: Load testing of 50te Spreader Bar by 100te Tensile Load Cell; 100te Test Cradle, various Test Weights and 200te Mobile Crane.
Client: Laser Gulf/NOV (end user)
Date: November 2020
Location: ORCA Offshore Base

Scope: 202te tilt test of 2500te derrick crane on Derrick Barge Azerbaijan “DBA”.
Client BosShelf;
Date: February 2021
Location: Baku South Bay

Scope: API Derick Inspection
Client : Caspian Drilling Caspian
Date: February 2021
Rig : Satti
Location : Azerbaijan , Baku

ORCA qualified inspectors performed inspection of rig derrick.

Scope – Spooling of 100mtr wire rope onto 10te spooling winch.
Client – BosShelf
Date – March 2021
Location – ORCA base

Scope: Full Inspection and Preservation of 5” drill pipes in accordance to DS 1
Client : Caspian Drilling Company
Date: March 2021
Location : ORCA Base, Azerbaijan, Baku

Scope: Test of runway beams and pad eyes of ACE (BP Azerbaijan)offshore platform.
Client: AZFEN
Date: March 2021
Location: ACE platform at AZFEN base

Scope: replacement of SORMEC crane wire ropes and load test
Client: CMS
Date: 04/2021
Location: DSV Akademik Tofiq Ismayilov at BSY

Scope: load test of life boats
Client: CMS
Date: April 2021
Location: DSV Akademik Tofiq Ismayilov at BSY

Scope: Rig Building
Client : Caspian Drilling Company
Date: August 2021
Rig: Satti
Location: Azerbaijan, Baku

ORCA qualified Rig Building team performed dismantling of old derrick equipment and installation of upgraded equipment back on to the rig’s derrick.